Studs And Pins For Sheet Metal---ShenZhen Kingfeal Hardware Co., Ltd

Products

Kingfeal Hardware Co., Ltd.
Phone：0086-0755-29376869
Market：0086-0755-82595119
Service：0086-0755-29376869
Fax：0086-0755-82597252
Zip code：518109
E-mail：info@kingfeal.com
Add：No.228 huating road, dalan street, longhua new district, shenzhen guangdong ,China

Products

The current position: Home > Products > Studs And Pins For Sheet Metal

Product Name:Studs And Pins For Sheet Metal

NAME：Studs And Pins For Sheet Metal

P.NO：FH, FHS, FHA, TFH, TFHS, HFH, HFHS, HFHB, TPS、FH4...

Concealed Head - Types CFHA, CFHC, CHA, CHC

concealed_head PEM self-clinching concealed-head studs install permanently in steel or aluminum sheets as this as .062" / 1.6mm to provide strong and reusable threads for mating hardware in a wide range of thin-metal assembly applications.

Flush-Head - Types FH, FH4, FHA, FHP, FHS

flush_head_studs Available in steel, aluminum and stainless steel, PEM standard flush-head studs are designed to be installed in sheets as thin as .040" / 1 mm.

Flush-Head, Low Displacement - Types FHL, FHLS

flush_head_low_displacement Flush, low-displacement head studs install closer to the edge of a sheet than PEM Types FH/FHS studs without causing that edge to bulge.

Heavy Duty, Non Flush - Types HFH, HFHB, HFE, HFHS

heavy_duty Heavy Duty studs are designed with an enlarged head diameter which projects above the sheet metal and provides maximum pull through in sheets as thin as .040" / 1mm

High Tensile Strength, Non Flush - Types HF109, HFG8

Heavy duty high tensile strength studs are manufactured for the most demanding applications from medium carbon alloy steel, then heat-treated to high strength and hardness qualities.

Thin Sheet, Non Flush - Types TFH, TFHS

Thin sheet studs are for sheets as thin as .020 inches / 0.51 mm. They may also be used in thicker sheets where flush head studs are not required. TFH studs are installed in the sheets in the same manner as flush-head studs; however different punches and anvils are required.

Unthreaded, Flush - Types TP4, TPS, TPXS

unthreaded pins Flush-head pilot pins satisfy a wide range of positioning, pivot, and alignment applications. The chamfered end makes mating hole location easy.

Installs Into Stainless - Types FH4, FHP, TP4

flush head studs One of the very basics of self-clinching is that the fastener must always be harder than the host sheet to ensure proper and permanent installation. Threaded types FH4, FHP and unthreaded type TP4 are specifically designed for installation into stainless steel sheets as thin as .040'" / 1 mm.

Micro, Self-Clinching - Type MPP™

MPP Type MPP, self-clinching micro pins are ideal for today's compact electronic assemblies. They can be installed into a variety of sheet materials up to HRB 92 / HB 195 in hardness and they offer excellent corrosion resistance.